Day: January 12, 2020

One of my periodic tasks here is to keep the kerosene heater in the boathouse (the lowest level of the house – it’s integrated to the “shop” which is the house’s basement) filled so that it can keep the boathouse’s interior temperature above freezing. This is important because the house’s water supply (and the main filters for it) run through the boathouse, given it’s the oldest part of the house. It is also uninsulated and has metal siding, meaning it loses heat rapidly when unheated and is likely quite inefficient to keep warm.
The kerosene heater has a 1 or 2 gallon tank, that needs to be removed and filled once a day when it’s not too cold. But as it gets colder (it’s 15° F / -10° C as I write this) this needs to be refilled more frequently. There is a 5 gallon plastic container for the kerosene, stored near the heater in the shop, which is in turn filled from the large outdoor storage tank. So I sometimes go to the storage tank and get a refill.
The kerosene heater is efficient, but it strikes me as impractical in this setting because although it burns kerosene, it has an electrical control that renders it useless if there is no power. In an extended power outage, it could not be used to heat the boathouse.

If I were to propose any single major project to Arthur to improve his house, it would be to figure out how to get the boathouse insulated. The spray-on insulation he used on the similar “kitchen shed” works well, but it was a nightmare to apply originally and for many years it was outgassing hazardous chemicals. The latter is not something Arthur ever cared about, but I’d rather not repeat that. I reckon the best insulation strategy for the boathouse would be some kind if inner frame (of wood or plastic) built within the boathouse walls, which could hold foam insulation or fiberglass and have some kind of outside layer – plywood or sheetrock, etc.